1995 3000GT VR-4: Rear Anti-Sway Bar Installation






This is one of the few things on my car that I actually paid someone else to do. This task is far easier with a lift, and I my schedule was pretty full at the time I needed to get this anti-sway bar on. I still hung out and took some pictures as the guys installed the bar, though. These are the pictures... they basically had to unbolt the whole rear subframe and lower it a bit to get clearance to get the OEM bar out and the Saner bar in. Also, the spacers (metal rings) on the upper part of the end links were too long, so they cut them in half to trim them down a bit.





Image01.jpg
Image01.jpg (75KB)

Image02.jpg
Image02.jpg (72KB)

Image03.jpg
Image03.jpg (63KB)

Image04.jpg
Image04.jpg (65KB)

Image05.jpg
Image05.jpg (65KB)

Image06.jpg
Image06.jpg (42KB)

Image07.jpg
Image07.jpg (70KB)

Image08.jpg
Image08.jpg (69KB)

Image09.jpg
Image09.jpg (60KB)

Image10.jpg
Image10.jpg (70KB)

Image11.jpg
Image11.jpg (68KB)

Image12.jpg
Image12.jpg (61KB)

Image13.jpg
Image13.jpg (71KB)

Image14.jpg
Image14.jpg (84KB)

Image15.jpg
Image15.jpg (72KB)

Image16.jpg
Image16.jpg (89KB)

Image17.jpg
Image17.jpg (79KB)

Image18.jpg
Image18.jpg (68KB)

Image19.jpg
Image19.jpg (43KB)

Image20.jpg
Image20.jpg (54KB)

Image21.jpg
Image21.jpg (68KB)

Image22.jpg
Image22.jpg (56KB)

Image23.jpg
Image23.jpg (54KB)

Image24.jpg
Image24.jpg (64KB)

Image25.jpg
Image25.jpg (54KB)





All this stuff is ©1999-2004 Erik Gross
This website brought to you by picture_page, and the letter 4.

A good buddy of mine put it well: "Unauthorized duplication, while sometimes necessary, is never as good as the real thing. And it could be bad for the pixels." As I've put a lot of time and effort into creating this webpage and website, I would prefer that you not redistribute, sell, or claim as yours any of the content of this site. I know I can't stop you if that's what you're going to do, but I'm asking nicely. If you would like to publish some of the content of this site in your own work (printed, electronic, or otherwise), please e-mail me and we can work something out.
 
Disclaimer
Feedback



Last Modified Sun May 23 2004 18:16:04 Pacific Daylight Time